Available now: 24/7 emergency service, at no extra cost

info@dakdienstnederland.nl+31 85 303 61 30

Ridge renovation

How long does a ridge renovation last?

A professionally renewed ridge lasts 20 to 30 years on average. How long it will last for you depends on materials, craftsmanship, weather and maintenance.

Renewed ridge tiles on a tiled roof after a ridge renovation

Short answer

A professionally renewed ridge on a tiled roof lasts on average 20 to 30 years. A modern dry ridge system often reaches the top of that range; a ridge traditionally bedded in mortar tends to be at the lower end. A renovated ridge finish on a flat roof lasts on average 15 to 25 years.

A sturdy, watertight ridge is crucial for the lifespan of your entire roof. Yet it is precisely the ridge, the highest line where the roof slopes meet, that is most exposed to wind, rain, frost and sun. Sooner or later a ridge renovation is needed. But how long does such a renovation last, what does that depend on and when is it smart to invest? We explain it step by step.

What determines how long a ridge renovation lasts?

New ridge tiles neatly aligned on a tiled roof
Good materials and neat alignment determine the lifespan.

Three factors together determine how long your renewed ridge will last:

Material

Ceramic ridge tiles (nokvorsten) generally last longer than concrete ones. A ventilated dry ridge system with screws and clips has a different lifespan than traditional mortar.

Craftsmanship

Correct alignment, proper fixing against wind loads and finishing all connections watertight. A poorly laid ridge sometimes causes problems within just a few years.

Environment and maintenance

On the coast or in an open polder the ridge has to endure more wind and salt than in a sheltered neighbourhood. Moss, falling leaves and shade also play a role.

We prefer materials with a proven long lifespan that match the rest of your roofing. If you also have the ridge checked periodically and small defects repaired quickly, you extend its lifespan considerably.

Average lifespan of a renewed ridge

In practice we see these guidelines:

SituationAverage lifespanExplanation
Tiled roof, dry ridge systemoften the top of 20 – 30 yearsflexible, ventilated, less cracking
Tiled roof, ridge in mortarmore like the lower end of 20 – 30 yearsmortar crumbles with a lot of weather exposure
Flat roof with ridge finish15 – 25 yearsassessed together with the roofing

With flat roofs with bitumen, the lifespan depends heavily on the combination of roofing, substructure and the way the ridge is finished. Regular checks by a professional are extra important there.

A ridge renovation is not a temporary stopgap, but a structural improvement. If you choose to renew all ridge tiles, repair the substructure and install a well-ventilated system, you can count on a lifespan close to a large part of your roof's remaining lifespan. We discuss this clearly with you in advance.

Mortar or dry ridge system: the difference in lifespan

Traditionally, ridge tiles are bedded in cement mortar. That gives a familiar look, but mortar is rigid. A roof moves due to temperature differences and wind, and over time that movement causes hairline cracks. Moisture gets in, freezes in winter and breaks the mortar further. As a result the mortar crumbles and the ridge tiles come loose.

A dry ridge system works without mortar. The ridge tiles are fixed with ridge clips and stainless steel screws to a ridge batten, with a watertight but vapour-permeable ridge roll underneath. That system moves with the roof, ventilates the ridge zone and is not susceptible to crumbling. That is why it often reaches the top of the lifespan range. For listed or characteristic homes a traditional finish may still be preferred; in that case we use a flexible mortar and a good base. You can read more about this under ridge tile renovation with Flexim roof mortar.

What does a ridge renovation cost and when does it pay off?

The costs depend on the length of the ridge, the type of roofing, accessibility and the condition of the existing structure. In the Netherlands you can count on an average of €25 – €165 per linear metre of ridge*, including labour and materials, for regular tiled roofs. For complicated roofs, great heights, scaffolding or extra repair work it can be higher. You get an exact price after an inspection; also read what a complete ridge renovation costs.

* The price depends on several factors, such as the type of tile or roofing, the surface area, accessibility and the condition of the substructure. After the free roof inspection you receive a fixed price.

A ridge renovation pays off especially when:

  • Recurring leaks: leaks regularly occur at the ridge.
  • Visible damage: you see loose or cracked ridge tiles.
  • Combined maintenance: you are already investing in roof maintenance or making your home more sustainable.
  • Weak spot: the rest of the roof is in reasonable condition, but the ridge is the weak link.

A targeted ridge renovation is often cheaper and more sensible than completely renewing the roof, especially if the tiles can last for years to come. You also prevent consequential damage to insulation, interior walls and ceilings.

Signs that your ridge needs renovating

Old ridge with moss between the ridge tiles
Moss and plants between the ridge tiles: a clear sign.
  • Loose ridge tilesRidge tiles are loose or have shifted.
  • Cracks in mortarVisible cracks in the mortar or pointing.
  • Leaks under the ridgeSmall leaks directly under the ridge line after rain or storms.
  • Moss and plantsGrowth between the ridge tiles retains moisture.
  • Moisture in the atticDamp patches, mould or wet insulation at the highest point.
  • AgeA roof of 25 years or older whose ridge has never been thoroughly dealt with.

The last two in particular are treacherous. Small leaks at the ridge are barely visible from the ground, and even without visible damage the mortar may already have crumbled or the fixings may be worn. By intervening in time, you prevent a small weak spot from leading to major damage during a storm. You can find more indicators in how do you recognise bad ridge tiles?

How to extend the lifespan of your ridge

To get the most out of a ridge renovation, we recommend a combination of the right choices, checks and timely maintenance:

  1. Choose a good systemA ventilated dry ridge system with durable ridge tiles creates less tension in the roof and removes moisture better.
  2. Have it checked periodicallyWe look at the ridge tiles and fixings, cracking in mortar and seals, moisture in the substructure and moss around the ridge line.
  3. Repair small defects immediatelyA loose ridge tile or open joint is cheap to fix as long as there is no consequential damage yet.
  4. Do not put unnecessary load on the ridgeDo not let inexperienced people work on the roof and provide a walkway if someone regularly needs to reach the chimney.

With a professionally installed ridge, periodic checks and timely repairs you increase the chance that your ridge renovation lasts 20 to 30 years or longer. You also get a 15-year guarantee with certificate on our work.

Have the condition of your ridge assessed free of charge

Would you like to know how much longer your current ridge will last, or what is financially most attractive in your situation? Request a free roof inspection. You receive a photo report and honest advice. You can read more about the approach and working method on our page about complete ridge renovation, or see how long a ridge renovation takes.

Frequently asked questions about the lifespan of a ridge renovation

How long does a new ridge on a tiled roof last?

A professionally renewed ridge lasts on average 20 to 30 years, provided sound materials are used and the rest of the roof is in good condition.

Does a dry ridge system last longer than mortar?

Often, yes. A ventilated dry ridge system reaches the top of the range in many cases, while a ridge bedded in mortar wears faster with a lot of weather exposure.

How long does a ridge finish on a flat roof last?

On average 15 to 25 years. Its lifespan is usually assessed together with the rest of the roofing.

What does a ridge renovation cost on average?

For regular tiled roofs you can count on approximately €25 – €165 per linear metre of ridge, including labour and materials. Complex roofs or extra repair work can be more expensive.

Should I have my ridge checked preventively?

If your roof is 25 years or older and the ridge has never been thoroughly dealt with, a check is wise. The mortar may already have crumbled without you being able to see it from the ground.

What guarantee do I get on a ridge renovation?

On a complete ridge renovation Dakdienst Nederland gives a 15-year guarantee, set out in a guarantee certificate. For a smaller repair to the ridge, such as securing loose ridge tiles, a 5-year guarantee applies.

Mario de Vet van Dakdienst Nederland

Unsure about your roof?

Mario de Vet and the team of Dakdienst Nederland, a close-knit family business, take a look for free. You get a photo report and honest advice: repair where possible, replace where necessary.

Book a free inspectionCall +31 85 303 61 30

Free roof inspection

Have your roof checked for free.

Tell us what is going on and where your home is. We usually call you back the same day to schedule the inspection.

  • Including photo report
  • No call-out fee
  • 24/7 emergency service at no extra cost
  • Up to 15-year guarantee (5 years on repairs)

What is going on with your roof?

  1. 1Problem
  2. 2Address
  3. 3Details
Choose what is going on with your roof

Something else?

Your address
Your details

No obligation. We usually call you back the same day.

Leaking right now? We're on our way.

24/7 emergency service at no extra cost and with no call-out fee.