Short answer
A full ridge renovation is needed after storm damage if the ridge mortar is porous or cracked over large sections, ridge tiles are structurally loose, there are repeated leaks around the ridge, the roof is getting on in years, or tile battens and counter battens under the ridge are affected. If the damage is limited to a few shifted or broken ridge tiles on an otherwise sound ridge, a targeted repair is usually enough.
Storm damage to the roof is often immediately visible: blown-off tiles, leaks or branches on the roof. But damage to the ridge, the highest and often most vulnerable part of the roof, sometimes goes unnoticed. Yet this is exactly where a small problem can quickly grow into major leaks, mould growth or damage to the roof structure.
In this article you will read when a ridge renovation is really needed after storm damage, which signs you can recognise and how to choose between repair and full replacement.
Signs after storm damage: when is the ridge at risk?
After a severe storm, do not just look at the roof tiles, but specifically at the ridge line. You can often do this first check from the ground:
- Crooked ridge tilesThe half-round or triangular tiles on the ridge (nokvorsten) no longer lie straight.
- Missing ridge tilesLoose or blown-away parts on the ridge line.
- GapsVisible openings between the ridge elements.
- Crumbled mortarOr loose bird stops along the ridge.
- Damp and draughts insideDamp patches on the top floor, draughts in the attic or mortar debris on the attic floor.
- Rattling in the windTicking or a flapping sound around the ridge.
Subtle clues such as sand or mortar debris in the attic can indicate hairline cracks in the ridge work or loosened parts that are not immediately noticeable. Especially with older roofs, there is a good chance a storm will worsen existing weak spots.
Sound is also an important signal. If you hear rattling, ticking or flapping around the ridge in strong wind, ridge tiles, screws or roof battens may have come loose. If this is left untreated, the next storm can tear off more components and the damage keeps growing. Also read how dangerous storm damage to ridge tiles is.
Free roof inspection after a storm

After storm damage, speed matters, but with care. Climbing onto the roof yourself is dangerous and often unnecessary. That is why we carry out a free roof inspection to assess the condition of the ridge and the rest of the roof objectively. Elsewhere a roof inspection normally costs somewhere between €100 and €200; with us this check is free and without obligation. With an acute leak or danger we come urgently 24/7, at no extra cost.
During the inspection an experienced roofer looks at, among other things:
- Ridge tiles: condition and fixing; loose, cracked or shifted.
- Substructure: damage to tile battens and counter battens.
- Watertightness: gaps, broken sealing strips and cracked mortar.
- Inside: traces of leaks in the ridge beam or insulation.
The roofer then explains the difference between minor storm damage that can be resolved with a targeted repair and situations in which a full ridge renovation is necessary. You get a cost indication without obligation based on the condition of your roof, the type of ridge (traditional in mortar or modern: ventilated ridge, screw-fixed ridge) and accessibility.
Typical storm damage to the ridge and its risks
Storm damage to the ridge ranges from seemingly small cracks to completely torn-off ridge tiles. Common are broken ridge tiles, crumbled or blown-out mortar, shifted ridge tiles and torn-out screw fixings on modern ridge systems. Ridge tiles also regularly stay in place just barely while their anchoring has gone: a ticking time bomb at the next strong gust of wind.
The risks are often underestimated. Through small cracks or gaps, rainwater and powdery snow get under the tiles. That leads to moisture in the roof structure, mould on the timber and eventually wood rot in ridge beams and purlins. In addition, wind can get under the roof covering through these openings, so that in a next storm much larger areas of tiles can come loose. One weakened ridge tile can thus undermine the stability of an entire roof side.
On tiled roofs with traditional mortar ridges, storm damage accelerates the ageing process: if the mortar was already porous, a storm knocks chunks loose and larger pieces start to move. With modern, mechanically fixed ridges, loose screws, torn ridge rolls and lifted ridge tiles are the familiar problems. Without timely intervention this can lead to structural leaks and even falling components.
Cost indication for ridge renovation after storm damage
The costs depend on the length of the ridge, the type of roof covering, the materials and accessibility (scaffolding, aerial platform, roof pitch).
| Approach | When | Indication |
|---|---|---|
| Partial ridge repair | Local damage: repairing a few metres, replacing ridge tiles, renewing mortar | €250 – €750 in total |
| Full ridge renovation | Removing all old ridge tiles, modern ventilated ridge system, new ridge tiles along the full length | €25 – €165 per linear metre* |
Indicative amounts. For long ridges or complex roofs with hips, bends and dormers, the total costs vary from a few hundred to several thousand euros. * The price depends on several factors, such as the type of tile or roofing, the surface area, accessibility and the condition of the substructure. After the free roof inspection you receive a fixed price.
Storm damage is almost always a matter of tailor-made work. Sometimes the inspection shows that components can still be reused, or on the contrary that extra work is needed, such as replacing affected timber parts. After the inspection you receive an itemised quote. Wondering whether the damage is covered? Then read whether storm damage is always insured.
When to repair, when to carry out a full ridge renovation?

The difference lies mainly in the extent and cause of the damage. With limited storm damage, such as a few shifted or broken ridge tiles while the rest of the ridge work is sturdy and not aged, a targeted repair is often enough. We then replace the damaged parts, restore the fixing and seal the joints watertight again. That is quicker, cheaper and causes less disruption. More on this on our page storm damage.
A full ridge renovation is generally called for when:
- The ridge mortar is porous, cracked or crumbled over large sections.
- Ridge tiles have been glued several times before and are now structurally loose.
- There are repeated leaks around the ridge, despite previous small repairs.
- The roof is getting on in years and the storm damage is mainly a symptom of general wear.
- The structure under the ridge, such as tile battens and counter battens, is affected or rotten.
In those cases repairing is often just treating the symptoms and costs you more in the long run. A complete ridge renovation not only repairs the storm damage, but also provides a future-proof solution with better watertightness, often better ventilation and a neater finish.
Conclusion
Storm damage to the ridge is not a detail, but crucial for the safety, watertightness and lifespan of your whole roof. Immediately after a storm, look out for crooked ridge tiles, gaps, leaks and strange noises. As a close-knit family business we are ready to help with a free inspection, honest advice on repair or renovation, no call-out fee and a guarantee with certificate: 15 years on the renovation, 5 years on a repair.
Frequently asked questions about ridge renovation after storm damage
How can I tell whether my ridge has storm damage?
From the ground, look for crooked or missing ridge tiles, gaps, crumbled mortar and loose bird stops. Inside, damp patches, draughts or mortar debris in the attic can indicate damage.
Can I go onto the roof myself after a storm?
We advise against it: it is dangerous and often unnecessary. Have the ridge assessed by a roofer; with us that inspection is free.
What does a ridge repair after storm damage cost?
A partial repair of local damage costs roughly €250 – €750. A full ridge renovation costs approximately €25 – €165 per linear metre.
When is a repair enough?
When the damage is limited to a few shifted or broken ridge tiles and the rest of the ridge work is sturdy and not aged.
What does rattling around the ridge in strong wind mean?
That ridge tiles, screws or roof battens may be loose. Have it checked quickly, because a next storm can tear off more components.
Is there emergency help for leaks after a storm?
Yes, with an acute leak or danger we come urgently 24/7, at no extra cost and with no call-out fee.


