Short answer
Chimney renovation is needed as soon as you see leaks or damp patches around the chimney, cracks, loose bricks or worn joints, a leaning chimney stack or problems when using the fire (blowback, poor draught, sooty smell). Do not wait: a weakened chimney quickly becomes a safety risk and damp damage builds up unnoticed.
A properly working chimney seems a given, but invisible wear brings risks. For the safety of your home, think of smoke and CO blowback or a chimney fire, and for your roof, with leaks and damp damage as a result. We are on roofs throughout the Netherlands every day and see up close what goes wrong when a chimney is left unattended for too long.
Whether it is a characteristic brick chimney, a modern construction or a chimney that is no longer used: timely inspection and maintenance prevent high costs later on.
Signs that your chimney needs attention right away

A leak around the chimney is the clearest sign. You notice it from damp patches on the ceiling or wall, mould in the attic or a musty smell near the chimney flue. Peeling wallpaper, discoloured plaster or flaking paint can also point to penetrating or wind-driven moisture. If you wait too long, the underlying roof structure becomes affected.
Visible cracks or loose bricks are a warning sign. Worn joints, loose bricks or a leaning chimney stack mean that structural safety may be at stake. In strong winds a weakened chimney can (partly) collapse, endangering residents and passers-by. Bits of cement or mortar on the roof or in the gutter are also a sign. Read more in how to recognise cracks in a chimney.
You can also notice signs inside the house:
- Smoke blowing back into the room.
- A fireplace or stove that draws poorly.
- A strong smell of soot or combustion in the house.
- Condensation or black deposits around the flue.
Such problems can indicate a blockage, a leak in the flue or subsidence. Stop using the fireplace or stove immediately and have the chimney checked.
Common causes of chimney damage
Wind and weather. Rain, frost, temperature changes and strong winds slowly attack brickwork and joints. Water that seeps into hairline cracks and freezes expands and causes further cracking. After many years this leads to porous bricks, loose joints and unstable parts. Because it happens gradually, the danger is often noticed late.
Ageing and overdue maintenance. Many chimneys are decades old and have hardly been checked since they were built. Old mortar, outdated lead flashings or a classic cap without a proper cover plate let more water through than modern systems.
Use and internal load.
- Intensive use without regular sweeping can lead to a build-up of creosote and soot.
- Changes to the flue, for example when connecting a new stove, can affect the draught.
- Vibrations from wind, traffic or building work can worsen existing hairline cracks.
During an inspection we therefore look not only at the visible part above the roof, but also at connections, lead, seals and, together with a specialist where necessary, the flue itself.
Free roof inspection by Dakdienst Nederland
Because chimney problems often only become visible when the damage is already advanced, Dakdienst Nederland always offers a free roof inspection with photo report. Elsewhere a roof inspection often costs €75 – €150. During the inspection we look at, among other things:
- the condition of the brickwork and joints;
- the connection of the chimney to the roof and roof covering;
- lead flashings, soakers and any cracks or detachment;
- the chimney cap, cover plate and possible leak points;
- visible subsidence, leaning or unstable parts.
You receive clear feedback with photos and a quote without obligation with solutions, material options and costs. No hidden costs and no standard solution that does not suit your home. Together we discuss what is really needed and what can wait a while.
Renovation methods, materials and cost indication

Sometimes repairing the pointing is enough: the old, porous joints are ground out and replaced with new, watertight pointing. Loose or damaged bricks are replaced and the lead flashings are often repaired or renewed at the same time. With more serious damage a rebuild renovation is needed, in which the chimney stack is partly or completely rebuilt, with a durable cover plate or concrete cap, a modern cowl against rain and birds, and renewal of all lead work.
| Approach | Indication |
|---|---|
| Pointing and brickwork repair | €500 – €1,500 |
| Partial or complete rebuild renovation | €1,000 – €3,000 |
| Including flue modification or flexible flue liner | €1,500 – €4,000 or more |
| Complete replacement | roughly €2,000 – €5,000 |
Indicative amounts, depending on size, accessibility, scaffolding and finish. The exact price follows after inspection.
In terms of materials, we increasingly choose durable, low-maintenance solutions: frost-resistant bricks, high-quality mortar, stainless steel cowls and quality lead or lead substitutes. Water-repellent impregnation gives the brickwork extra protection against moisture. See also chimney renovation costs.
When to choose renovation or complete replacement?
The choice depends on three questions: how bad is the damage, how old is the chimney and how intensively is it used? If the brickwork is mostly in order and it is mainly a matter of joints, lead and a few loose bricks, renovation is usually the logical and cost-effective choice. Replacement comes into the picture if:
- the chimney has subsided badly or is leaning;
- there are large cracks or unstable parts;
- a large proportion of the bricks are porous or broken;
- the chimney can no longer be saved structurally.
In that case demolishing and rebuilding, possibly in a lighter version, can be safer and more cost-effective in the long term. An unused chimney can also be partly taken down to just above the roof, with a properly insulated finish. Might you want to install a fireplace one day, or can the chimney go? Also read renovating or removing a chimney.
Having it checked in time pays off
A chimney you never look at can unnoticed become a weak spot in your home. By watching out for cracks, leaks and poorly drawing flues and having your chimney inspected regularly, you avoid high costs. As a family business we give honest advice on repair, chimney renovation or replacement, with a guarantee and certificate: 15 years on a complete chimney renovation or replacement, 5 years on repairs.
Frequently asked questions about when to renovate a chimney
What is the clearest sign that my chimney needs renovation?
A leak around the chimney: damp patches on the ceiling or wall, mould in the attic or a musty smell near the flue. Visible cracks, loose bricks and a leaning stack are also clear warning signs.
Should I stop using the fire if smoke blows back?
Yes. Smoke blowing back, a strong sooty smell or poor draught can indicate a blockage, a leak in the flue or subsidence. Stop using the fireplace or stove and have the chimney checked first.
How does chimney damage usually occur?
Through rain, frost, temperature changes and wind. Water seeps into hairline cracks, freezes and expands. After years, bricks become porous and joints loose. Ageing, overdue maintenance and intensive use also play a role.
What does pointing and brickwork repair on a chimney cost?
For pointing and brickwork repair alone, the costs are usually between €500 and €1,500, depending on size and accessibility.
When is complete replacement necessary?
When the chimney has subsided badly or is leaning, there are large cracks or unstable parts, many bricks are porous or broken, or the structure can no longer be saved. Replacement costs roughly €2,000 – €5,000 on average.
Can I also remove a chimney I no longer use?
Yes, an unused chimney can be partly taken down, for example to just above the roof, with a properly insulated finish. That is worth considering if you only use central heating or a heat pump.



